Shining HP chains include heat treated sidebars for ‘double strength’ and case carbonized pins, bushes and rollers for optimum abrasion resistance. HP series denoteshollow bearing pin to allow cross rods or bolts to be fitted through the chain strands.
Chain NO. | Average Pitch P | E（mm） Min | Sidebar | Pin | ||||||||
t/T（mm） Max | H（mm）Max | D（mm）Max | D1（mm）Min | |||||||||
ZC21 | 38.1 | 50.8 | 63.5 | 76.2 | - | - | - | 12.7 | 2.5 | 18.0 | 9.0 | 6.5 |
ZC40 | 50.8 | 63.5 | 76.2 | 88.9 | 101.6 | 127.0 | 152.4 | 15.0 | 4.0 | 25.0 | 14.0 | 10.2 |
ZC60 | 76.2 | 88.9 | 101.6 | 127.0 | 152.4 | 177.8 | 203.2 | 19.0 | 5.0/4.0 | 40.0 | 19.0 | 13.2 |
ZC150 | 101.6 | 127.0 | 152.4 | 177.8 | 203.2 | 228.6 | 254.0 | 26.0 | 7.0/5.0 | 50.0 | 26.9 | 20.2 |
ZC300 | 152.4 | 177.8 | 203.2 | 254.0 | 304.8 | - | - | 38.0 | 10.0/8.0 | 60.0 | 32.0 | 22.5 |
Chain NO. | Pin | Barrel | Roller | Min breaking load | ||||
A（mm） Max | A1（mm） Max | R（mm） Max | F（mm） Max | F0（mm） Max | F1（mm） | Q（KN） | *Q（KN） | |
ZC21 | 26.0 | 27.5 | 11.0 | 25.4 | - | - | 21.0 | - |
ZC40 | 36.4 | 37.7 | 17.0 | 31.8 | 40.0 | 2.5 | 40.0 | 50.0 |
ZC60 | 45.0 | 46.0 | 23.0 | 47.5 | 60.0 | 3.5 | 60.0 | 120.0 |
ZC150 | 58.0 | 60.5 | 33.0 | 66.7 | 82.0 | 4.0 | 150.0 | 190.0 |
ZC300 | 83.0 | 85.0 | 38.0 | 88.9 | 114.0 | 8.5 | 300.0 | 380.0 |
